MODELS
The base machine is a tabletop model.
DPV18 / DPV35
The DPV models are pneumatic.
- 18 mm product passage.
- 35 mm product passage.
DPVS18 / DPVS35
The DPVS models are electronic with servomotor.
- 18 mm product passage.
- 35 mm product passage.
CATALOGUE
Download PDF
What do you need to know about the supports?
- The different supports are attached to the tabletop machine.
- Various supports can be combined depending on the product to be manufactured.
- Their ease of assembly and disassembly also helps with cleaning tasks.
HEIGHT-ADJUSTABLE SUPPORT WITH WHEELS
The machine can be set at an adjustable height from 70 to 100 cm.
MOULD CONVEYOR
Conveyor belt synchronised with the doser, once positioned the osingis done automatically.
SUPPORT WITH LIFT
By means of a pneumatic device, the tabletop machine can be lowered to load the hopper. Once it has been filled, the device is activated so that the doser returns to the working height.
MOULD-HOLDER SUPPORT
Tray attached to the machine outlet to support the mould or tray while dosing is taking place. It attaches directly to the tabletop machine.
TRANSFER PUMP
Facilitates the transfer of the product from a mixing tank to the hopper, allowing for constant production.
What do you need to know about the different outlets?
- The outlet is chosen according to the product to be dosed.
- Needles for injection. Different lengths, diameters, number of needles, etc. can be manufactured according to the client’s needs.
- Their ease of assembly and disassembly also helps with cleaning tasks.
DOSER HEAD FOR SAUCES
Circular doser outlet in the form of a sprinkler with small holes suitable for spreading sauces or creams.
.
OUTLET EXTENSION
Extension of the doser line to move the doser outlet farther away.
HOSE AND HAND GUN
Hose with electrically or pneumatically operated mobile doser outlet, to manually control the point where the product is dosed. For liquid and semi-liquid products.
ROTARY CUTOFF NOZZLE
Special nozzle for elastic and/or sticky dough in which the passage of the dough is done by a rotating valve. For soft, heavy and aerated semi-liquid products.
INJECTION NEEDLES
Different lengths, diameters, number of needles, etc. can be manufactured according to the client’s needs.
VERTICAL VALVE
or liquid, semi-liquid and aerated products.
HORIZONTAL VALVE
For soft, heavy and aerated products.
NOZZLE FOR DONUTS
Circular nozzle with different outlets, specially suited for products such as donuts, or for decoration.
CAKEHEAD
Nozzle with different outlets forming a circle, especially suited for decorating cakes.
What do you need to know about cylinder/piston units?
- A cylinder and piston unit is included with the tabletop depositor.
- A doser machine can have several units.
- Each unit can dose between a maximum and a minimum.
- The larger the piston diameter, the less precision there is in small doses.
SMALL PISTON AND CYLINDER UNIT
MEDIUM PISTON AND CYLINDER UNIT
LARGE PISTON AND CYLINDER UNIT
What do you need to know about the hopper?
- The standard hopper is conical and has a capacity of 30 litres.
- Hoppers with other capacities and different shapes can be attached.
- Heating blankets can be made to keep the hopper warm.
- A stirrer can be attached to cylindrical hoppers.
STANDARD HOPPER
HOPPER WITH DOUGH SEPARATOR
To make products with two different flavours/colours (marbled).
CYLINDRICAL HOPPER WITH SILICONE LID
For aerated dough.
Dosing system
- The dosing system does not harm the dough and gives us the ability to work with a range of different products.
- The volumetric dosing is regulated through the touch screen in its different versions, both for the DPV (pneumatic) and the DPVS (with servo motor) versions.
- The following table compares the main advantages of the DPVS over the DPV or other pneumatic dosers.
DIFFERENCES BETWEEN PNEUMATIC/SERVO DOSER MACHINES
|
DIFFERENCES BETWEEN DOSAGES |
DPV (PNEUMATIC) |
DPVS (WITH SERVO MOTOR) |
| Control of the dosing parameters by touch screen | No | Yes |
| Número de programas dosificación (recetas) | 0 | 999 |
| Regulación de dosis | Mecánico (manual mediante volante y contador) | Electrónico (muy preciso) |
| Control de velocidad de carga | Neumático (regulación manual) | Electrónico (muy preciso) |
| Control de velocidad de descarga | Neumático (regulación manual) | Electrónico (muy preciso) |
| Señal a pedal | Neumático | Electrónico |
| Repetición de dosis en el mismo molde por programa (para grandes dosis) | No | Yes |
| Señal foto-célula | No | Yes |
| Señal externa | No | Yes |
| Acoplable a cinta directa (parada de cinta) | No | Yes |
| Control tiempo entre dosis | No | Yes |
| Programa Auto-limpieza | No | Yes |
| Dosificación secuencial (patrón) | No | Yes |
| Adecuada para | Monoproducto | Multiproducto y multidosis |
TECHNICAL DATA SHEET
DPV MODEL (pneumatic)
| MODELO DPV (neumática) | C18 | C35 |
| DOSIS MÃ�NIMA – MÃ�XIMA* | ||
| Tamaño de pistón pequeño Ø 25mm | 10 cc – 96 cc | |
| Tamaño de pistón mediano Ø 50mm | 40 cc – 392 cc | 30 cc – 295 cc |
| Tamaño de pistón grande Ø 100mm | 120 cc – 1150* cc | |
| Consumo de aire | 100 L/m | |
| Velocidad de dosificación* | hasta 120 ciclos/minuto | |
| Medidas A x F x H** | 104×50,5×76,5cm DPV sobremesa con pistola horizontal y depósito de 30L | |
| Capacidad del depósito | 32 ó 50 L | |
| Accionamiento | a pedal, pulsador gatillo o fotocélula | |
| * Según tipo de masa consistencia y cantidad de dosis. **La medidas varÃan dependiendo del calibre, el depósito, la pistola y de si lleva incorporado el elevador o la mesa.Todas las partes de la máquina en contacto con la masa están fabricadas con materiales aptos para uso alimentario y Acero Inoxidable AISI304. | ||
DPVS MODEL (with servo motor)
| MODELO DPVS (con servo) | C18 | C35 |
| DOSIS MÃ�NIMA – MÃ�XIMA | ||
| Tamaño de pistón pequeño Ø 25mm | 7 cc – 72 cc | |
| Tamaño de pistón mediano Ø 50mm | 30 cc – 295 cc | 30 cc – 295 cc |
| Tamaño de pistón grande Ø 100mm | 120 cc – 1150* cc | |
| Consumo eléctrico | 500 W | |
| Consumo de aire | 30 L/m | |
| Velocidad de dosificación* | hasta 120 ciclos/minuto | |
| Medidas A x F x H** | 114x54x71 cm | 117,2x54x73,5 cm DPVS sobremesa con pistola horizontal y depósito de 30L | |
| Capacidad del depósito | 32 ó 50 L | |
| Accionamiento | a pedal, pulsador gatillo o fotocélula | |
| * Según tipo de masa consistencia y cantidad de dosis. **La medidas varÃan dependiendo del calibre, el depósito, la pistola y de si lleva incorporado el elevador o la mesa.Todas las partes de la máquina en contacto con la masa están fabricadas con materiales aptos para uso alimentario y Acero Inoxidable AISI304. | ||
