Horizontal injector machine for filling chocolate into “bollycaos” IA+

Machine to inject chocolate and/or jam into elongated buns, such as “bollycaos”.

✅ Injection quantity and speed can be set on the screen thanks to the servomotor, allowing a more precise adjustment.

✅ Heated tank.

✅ Equal and uniform dosage on all buns.

✅ Injects the product along the entire length of the bun evenly throughout production.

Can be easily disassembled for easy and effective cleaning.

NEEDS:

The customer wants to inject chocolate and/or jam into elongated buns, bollycao type, automatically to increase production significantly compared to a manual production, being able to control the dosage and that it is uniform and approximately equal in all buns.

CHALLENGE:

To design a new machine model in which the product can be injected along the entire length of the bun, so that the bun remains in the same position for the duration of the injection and that the injection is regular throughout production.
It is also necessary, especially for chocolate, for the product to be kept warm so that it can be injected without problems and maintain its properties.

SOLUTIONS PROVIDED:

Design of a horizontal injector, in which the needles do not prick vertically but horizontally.
The conveyor is fixed to the chassis and has guides that facilitate the manual positioning of the pellets for the convenience of the operators.
The injection head has 8 nozzles in which the needles are positioned horizontally and the whole block, including the tank, moves forward so that the needles prick the buns and the product is injected at the same time as they are being withdrawn, thus achieving uniform injection throughout the whole bun. At the moment of injection, a retainer prevents the pellets from moving and the product is not injected correctly.
The injection quantity and speed can be set on the screen thanks to the servomotor, allowing a more precise adjustment.
The tank is heated by heating elements to keep the product warm and facilitate injection.
At the end of the belt there is an ejector so that it is much easier to remove the product.

? See other models of Injector Machines